Version 4 (other 3 are not shown )
Added the cavities in the fins, and printed at 50nm - 18 hrs to print. O_o
Lost a smidge of height from the supports pushing it outside the envelope, otherwise would have ~1/8 inch more neck.
While Jennifer called it correctly- the printlines became more visible with a day on my desk on the others, this one has no print lines, but there is a odd 'ripple' pattern on the sides - I'm wondering if it's resin slowly creating a pattern while the bottle prints? Still, honestly excited. Will be trying some advice I noted on the form1 forums to spray them with Krylon Acrylic UV protect gloss clear spray paint to see if it makes the resin 'pop' back to glass-like clarity.